You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
Neil Alexander c83fe40250
Initial FreeBSD/OpenBSD/NetBSD support (doesn't have syscalls for interface config yet)
2 years ago
waterutil Fix to use To4() 6 years ago
.gitignore test cleanup 3 years ago
.travis.yml use blocking mode pre-go1.11 3 years ago
CONTRIBUTORS Update CONTRIBUTORS 3 years ago
LICENSE add LICENSE file 5 years ago
Makefile add .travis.yml 3 years ago
README.md Added description for specifying an interface name for Windows 3 years ago
doc.go add darwin support for point-to-point TUN and update doc 5 years ago
if.go use blocking mode pre-go1.11 3 years ago
if_linux.go use blocking mode pre-go1.11 3 years ago
ipv4_darwin_test.go test cleanup 3 years ago
ipv4_go1.11_test.go use blocking mode pre-go1.11 3 years ago
ipv4_linux_test.go test cleanup 3 years ago
ipv4_other_test.go fix darwin test build 4 years ago
ipv4_test.go test cleanup 3 years ago
ipv4_windows_test.go test cleanup 3 years ago
params_bsd.go Initial FreeBSD/OpenBSD/NetBSD support (doesn't have syscalls for interface config yet) 2 years ago
params_darwin.go addressing comments 3 years ago
params_linux.go cleanup 3 years ago
params_others.go Initial FreeBSD/OpenBSD/NetBSD support (doesn't have syscalls for interface config yet) 2 years ago
params_windows.go Styling fixes for Windows device selection support 3 years ago
syscalls_bsd.go Initial FreeBSD/OpenBSD/NetBSD support (doesn't have syscalls for interface config yet) 2 years ago
syscalls_darwin.go addressing comments 3 years ago
syscalls_darwin_go1.11.go use blocking mode pre-go1.11 3 years ago
syscalls_darwin_legacy.go use blocking mode pre-go1.11 3 years ago
syscalls_linux.go use blocking mode pre-go1.11 3 years ago
syscalls_linux_go1.11.go use blocking mode pre-go1.11 3 years ago
syscalls_linux_legacy.go use blocking mode pre-go1.11 3 years ago
syscalls_other.go Initial FreeBSD/OpenBSD/NetBSD support (doesn't have syscalls for interface config yet) 2 years ago
syscalls_windows.go Windows: don't trip over empty HardwareAddr when enumerating interfaces (this happens sometimes when miniport/VPN adapters are active on the system) 3 years ago

README.md

water

water is a native Go library for TUN/TAP interfaces.

water is designed to be simple and efficient. It

  • wraps almost only syscalls and uses only Go standard types;
  • exposes standard interfaces; plays well with standard packages like io, bufio, etc..
  • does not handle memory management (allocating/destructing slice). It's up to user to decide whether/how to reuse buffers.

water/waterutil has some useful functions to interpret MAC frame headers and IP packet headers. It also contains some constants such as protocol numbers and ethernet frame types.

See https://github.com/songgao/packets for functions for parsing various packets.

Supported Platforms

  • Linux
  • Windows (experimental; APIs might change)
  • macOS (point-to-point TUN only)

Installation

go get -u github.com/songgao/water
go get -u github.com/songgao/water/waterutil

Documentation

http://godoc.org/github.com/songgao/water

Example

TAP on Linux:

package main

import (
	"log"

	"github.com/songgao/packets/ethernet"
	"github.com/songgao/water"
)

func main() {
	config := water.Config{
		DeviceType: water.TAP,
	}
	config.Name = "O_O"

	ifce, err := water.New(config)
	if err != nil {
		log.Fatal(err)
	}
	var frame ethernet.Frame

	for {
		frame.Resize(1500)
		n, err := ifce.Read([]byte(frame))
		if err != nil {
			log.Fatal(err)
		}
		frame = frame[:n]
		log.Printf("Dst: %s\n", frame.Destination())
		log.Printf("Src: %s\n", frame.Source())
		log.Printf("Ethertype: % x\n", frame.Ethertype())
		log.Printf("Payload: % x\n", frame.Payload())
	}
}

This piece of code creates a TAP interface, and prints some header information for every frame. After pull up the main.go, you'll need to bring up the interface and assign an IP address. All of these need root permission.

sudo go run main.go

In a new terminal:

sudo ip addr add 10.1.0.10/24 dev O_O
sudo ip link set dev O_O up

Wait until the output main.go terminal, try sending some ICMP broadcast message:

ping -c1 -b 10.1.0.255

You'll see output containing the IPv4 ICMP frame:

2016/10/24 03:18:16 Dst: ff:ff:ff:ff:ff:ff
2016/10/24 03:18:16 Src: 72:3c:fc:29:1c:6f
2016/10/24 03:18:16 Ethertype: 08 00
2016/10/24 03:18:16 Payload: 45 00 00 54 00 00 40 00 40 01 25 9f 0a 01 00 0a 0a 01 00 ff 08 00 01 c1 08 49 00 01 78 7d 0d 58 00 00 00 00 a2 4c 07 00 00 00 00 00 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37

TUN on macOS

package main

import (
	"log"

	"github.com/songgao/water"
)

func main() {
	ifce, err := water.New(water.Config{
		DeviceType: water.TUN,
	})
	if err != nil {
		log.Fatal(err)
	}

	log.Printf("Interface Name: %s\n", ifce.Name())

	packet := make([]byte, 2000)
	for {
		n, err := ifce.Read(packet)
		if err != nil {
			log.Fatal(err)
		}
		log.Printf("Packet Received: % x\n", packet[:n])
	}
}

Run it!

$ sudo go run main.go

This is a point-to-point only interface. Use ifconfig to see its attributes. You need to bring it up and assign IP addresses (apparently replace utun2 if needed):

$ sudo ifconfig utun2 10.1.0.10 10.1.0.20 up

Now send some ICMP packets to the interface:

$ ping 10.1.0.20

You'd see the ICMP packets printed out:

2017/03/20 21:17:30 Interface Name: utun2
2017/03/20 21:17:40 Packet Received: 45 00 00 54 e9 1d 00 00 40 01 7d 6c 0a 01 00 0a 0a 01 00 14 08 00 ee 04 21 15 00 00 58 d0 a9 64 00 08 fb a5 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37

Caveats

  1. Only Point-to-Point user TUN devices are supported. TAP devices are not supported natively by macOS.
  2. Custom interface names are not supported by macOS. Interface names are automatically generated serially, using the utun<#> naming convention.

TAP on Windows:

To use it with windows, you will need to install a tap driver, or OpenVPN client for windows.

It's compatible with the Linux code.

package main

import (
	"log"

	"github.com/songgao/packets/ethernet"
	"github.com/songgao/water"
)

func main() {
	ifce, err := water.New(water.Config{
		DeviceType: water.TAP,
	})
	if err != nil {
		log.Fatal(err)
	}
	var frame ethernet.Frame

	for {
		frame.Resize(1500)
		n, err := ifce.Read([]byte(frame))
		if err != nil {
			log.Fatal(err)
		}
		frame = frame[:n]
		log.Printf("Dst: %s\n", frame.Destination())
		log.Printf("Src: %s\n", frame.Source())
		log.Printf("Ethertype: % x\n", frame.Ethertype())
		log.Printf("Payload: % x\n", frame.Payload())
	}
}

Same as Linux version, but you don't need to bring up the device by hand, the only thing you need is to assign an IP address to it.

go run main.go

It will output a lot of lines because of some windows services and dhcp. You will need admin right to assign IP.

In a new cmd (admin right):

# Replace with your device name, it can be achieved by ifce.Name().
netsh interface ip set address name="Ehternet 2" source=static addr=10.1.0.10 mask=255.255.255.0 gateway=none

The main.go terminal should be silenced after IP assignment, try sending some ICMP broadcast message:

ping 10.1.0.255

You'll see output containing the IPv4 ICMP frame same as the Linux version.

Specifying interface name

If you are going to use multiple TAP devices on the Windows, there is a way to specify an interface name to select the exact device that you need:

	ifce, err := water.New(water.Config{
		DeviceType: water.TAP,
		PlatformSpecificParams: water.PlatformSpecificParams{
			ComponentID:   "tap0901",
			InterfaceName: "Ethernet 3",
			Network:       "192.168.1.10/24",
		},
	})

TODO

  • tuntaposx for TAP on Darwin

Alternatives

tuntap: https://code.google.com/p/tuntap/